Dimmable/N Spiral 3W LED Wall Sconce Lamp Cylinder Ceiling Light Fixture Style # D03015

Dimmable/N Spiral 3W LED Wall Sconce Lamp Cylinder Ceiling Light Fixture

The dimmable one works with SCR dimmer (not included).

Perfect for indoor wall lighting. Application: bedroom,canteen, living Room, hotel, lobby, cafe etc.

Specification:

Dimension:

Surface mounted:

Flush mounted:

Effect:

Features:
• Long lifespan
• Instant start, no flashing
• Solid State, shockproof
• save power more than 90% by ordinary bulbs
• Long time working, produce low heat
• No RF Interference
• No mercury or other hazardous materials, accord with RoHs
• Working environment -20°C-40°C, suitable for unusual climate
• Application: Hall, Bedroom, Canteen, Hotel, Store, Living room etc
• Low maintenance cost
• Easy to install

How to install?

Surface Mounted: This fixture does need to be hard wired.

Professional installation is recommended.

Steps to install:

1. Use a screwdriver to screw out the bolts which connected the mounting base

and main fixture.

2. Fix the mounting base on the wall (wooden wall, using self-tapping screw to fix;

cement wall, drill holes to install; if you have a suitable electric box to fix this wall light,

that would be easier to install.).

3.Connect the power cords of the wall lamp to the 110V or 220V circuits (no distinction

between the live line and zero line, one for live line and the other for zero line.

If the wires were pretty long, please roll into a circle and place in a vacant position

in lamp-chimney).

4. Put the main fixture onto the mounting base, aim at the bolt hole, then fix the screws.

Flush Mounted: This fixture does need to be hard wired.

Professional installation is recommended.

Steps to install:

1. Cut off your wall/Ceiling.

Hole cut size:5cm(1.97")-9.5cm(3.74")

2. Connector the power cords of the lamp to the 110V or 220V circuits.

3.Put the light into the hole.

 4.Finish the installation.

Package Included:

    1 x 3W LED wall light