Dimmable/N 3W LED Ceiling Light Wall Lamp Fixture Bulb Disco Style # D01001

 Dimmable/N 3W LED Ceiling Light Wall Lamp Fixture Bulb Disco

Note:The dimmable light works with SCR dimmer (not included). 

Perfect for indoor wall/Ceiling lighting.

Application: Living Room, Hotel, Store, Bedroom, Lobby etc.

Specification:

Dimension:

Flush mounted:

Surface mounted:

Features:
• Long lifespan
• Instant start, no flashing
• Solid State, shockproof
• save power more than 90% by ordinary bulbs
• Long time working, produce low heat
• No RF Interference
• No mercury or other hazardous materials, accord with RoHs
• Working environment -20°C-40°C, suitable for unusual climate
• Application: Hall, Canteen, Bar, Disco, Hotel, Vestibule, KTV etc
• Low maintenance cost
• Easy to install

How to install？

Flush Mounted: This fixture does need to be hard wired.

Professional installation is recommended.

Steps to install:

1. Cut off your wall/Ceiling.

2. Connect the power cords of the lamp to the 110V or 220V circuits.

3. Put the light into the hole.

4. Finish the installation.

Surface Mounted: This fixture does need to be hard wired.

Professional installation is recommended.

Steps to install:

1. Use a screwdriver to screw out the bolts which connected the mounting base

and main fixture.

2. Fix the mounting base on the wall (wooden wall, using self-tapping screw to fix;

cement wall, drill holes to install; if you have a suitable electric box to fix this wall light,

that would be easier to install.).

3. Connect the power cords of the wall lamp to the 110V or 220V circuits (no distinction

between the live line and zero line, one for live line and the other for zero line.

If the wires were pretty long, please roll into a circle and place in a vacant position in

lamp-chimney).

 4. Put the main fixture onto the mounting base, aim at the bolt hole, then fix the screws.

Package Included:

   1 x 3W LED light